NSR250.net Forums Logo: Honda NSR 250 Forums, Classifieds and Service Manual in English. Covering All Honda NSR 250 MC16, MC18, MC21 and MC28 models
NSR250.net Forums

#
 
#
 
Performance Engineering

  • NSR250 Forums Index ‹
  • Members Content
  • Members Garage
  • Subscription
  • Transactions
  • FAQ
  • Search
  • Register
  • Log in

View Single Post


 Topic: NSR MC28 High temp on lower cyclinder 







George1980sproth

 
    Send private message View user's profile
    Reply with quote

George1980sproth » Mon Aug 19, 2019 2:13 pm

Hi Andy

Thanks for all the advice I will try spraying the cleaner by the flywheel and see what happens. The bike sounds great and runs well at idle, the rpm is fine. the gearbox oil could explain the white smoke as its not too much air something is burning off.

I have an infrared heat gun that's how I know its hot. The top left barrel just at the start of the exhaust reaches about 90 degrees after a few minutes running where as the lower one reaches 130 degrees. They don't get much hotter after riding.

also I have striped and cleaned the power valve on the lower barrel it may have seized and the wires were full of gunk these have all been freed up now but haven't had chance to refit back due to young kids. So will be interesting to see what happens after that.

To be honest though I am expecting the worst. Any ideas what a crank rebuild will cost at GT's in Plymouth?

Ian
Back to top

  • NSR250 Forums Index
  • All times are GMT
Powered by phpBB © 2001, 2005 phpBB Group


Hosted by NSR250dotNET © 2008 NSR250dotNET