Hi guys had some time over the weekend,so had a quick fiddle ,but no joy
I took the servo apart all seems fine moves freely,I hooked a 9v battery to the two white wires that comes out the servo motor and it moves fine and when you reverse the polarity ,it goes the other way
Not quite sure what the other 3 wires do that go into the other part , all of the wires have a live although 2 of them only stay live for about 5/10 seconds, I have power to the TPS but nothing happens to the servo if disconnect and reconnect it . All the connections to the PGM show no signs fatigue..
I started and ran the bike , and it sounds crisp but servo doesn't move , the cables and power valves all move freely, don't no what to try next !! Any help appreciated...